What measures should be taken to prevent future damage to the CNC Machining Parts centers during maintenance?

Precision Cnc Machining center is a kind of production equipment with high precision and high efficiency, for its maintenance, essential maintenance of equipment and extend its life cycle play a vital role. Here are some notes on the maintenance of CNC machining centers:Here are some notes on the maintenance of CNC machining centers:
1. Daily inspection and maintenance:
During or at the of the day’s work and especially when the work is done, chips should be removed from the CNC machining center to ensure that the worktable is clean.
inspect the lubrication to check if the oil circuit operates properly and replace the lubricant to check the normality of the oil level.
In this step examine whether the entire wiring in the electrical cabinet is in order and whether the connection in the barrel is firm so as to avoid failure due to frail contact.
Visually inspect the air tubes, joints and cylinders and so on so forth, do check for any leakage occasionally.
2.Regular maintenance:
Make periodic maintenance as stated by the manufacturing company’s advice i.e checking worn out parts, the mechanical parts’ alignment, among other services.
Updates and backups of the CNC system: carry out updates of the software often, make copies of CNC files often to avoid instability of the system.
Svc especially should be checked up and maintained regularly together with servo motors, drives and encoders, etc.
3. Environment and temperature control:
It should be noted that the CNC machining center should be set up in a very dry and properly ventilated area, so that dust and moisture will not have a detrimental effect on the equipment.
Regulate the temperature of the environments in which equipment is working to prevent the situations that the temperature is too high or too low to hinder the working state of the equipment.
4. Operation specification:
Conduct yourself according to the guidelines set for the CNC machining center to prevent damage to the machinery as a result of one’s mistakes.
In the operation, one should always give attention to the sign of the statuses of the equipment and looking for the abnormalities and solving them in due course.
5. Professional maintenance:
For frequent repair and maintenance of large and important equipment, it should be completed by professional maintenance staff to prevent craftsmen from arbitrarily disassembling or adjusting the equipment.
While it is for the occurrence of faults details must be taken to enable future failure analysis and thereby prevent more occurrences.
6. Spare parts management:
Ensure that appropriate stock of spare parts is available for efficient replacement in-case of a breakdown to avoid prolonged use of the equipment.
By the above-mentioned measures, it is possible to improve the participation of the CNC machining center so as to maintain the long-term stable operation state and to ensure the protection in the process of production.