Dynamic high precision machining center for tool and mold making

The dynamic high-Precision Machining center achieves linear drive of all axes, and its dynamic performance is comparable to the DMC 75 V linear vertical precision machining center exhibited by Deckel Maho at the EMO exhibition in Milan. The machining center can be expanded to a maximum of five axes. Machining Center.

Deckel Maho's DMC 75 V linear machining center achieves an acceleration of 2g for each linear drive, a maximum operating speed of 90m/min and a productivity increase of at least 20%.
High-precision frame structure The stable cast frame structure and the FEM-optimized high-rigidity bed form the basis for machine tool operation and surface precision. Its direct displacement measurement system meets the high precision requirements of contour machining.
Similarly, the machining center can simultaneously select five-axis machining, which is achieved by a combination of a spindle and a CNC rotary table. The two shafts are equipped with direct drives and are fitted with three high speed linear shafts. Other key innovations are the increased workspace space to meet the need for chip falling, and the improved shape and size of the bed makes it easier for operators to operate the equipment. In addition, through the machine side door and the additional front door, the top load is evenly distributed over the entire working surface when the crane is hoisted.
The DMC 75 V linear precision machining center is equipped with the high-speed 3D controller Heidenhain iTNC 530. Behind the DMG control panel with 15-TFT display, not only high-level control technology, but also innovative software tools, the ATC application adjustment cycle further enhances the advanced nature of automatic control.
The machining parameters of the optimization job The preset surface parameters, speed or precision in the workpiece program are input into the control system by the buttons as the machining parameters for the automatic optimization operation. It makes all workpiece machining the best from the standard. It is not necessary to enter the basic parameters of the machine every time roughing or finishing, and ATC automatically adjusts the DMC 75 V linear machining center for different situations. Depending on the weight of the workpiece, the machining time is minimized while meeting the quality requirements. Since adaptive acceleration control is available in the standard version, the CNC control device recognizes the weight of the workpiece being clamped by the current detection signal of each axis, and selects its dynamic parameters based on this.
To increase automation, the modular approach of the DMC 75 V linear machining center offers many options. According to the manufacturer's instructions, the new DMC 75 V linear machining center exhibited at the EMO exhibition in Milan should be the beginning of the vertical precision machining center series.
Machine tool highlights: 1 linear drive of each axis; 2 maximum acceleration of 2g and 90m/min fast moving speed; 3 five-axis machining of direct drive on spindle head and NC-turntable; 418000 rotary spindle; 515-TFT display DMG control panel, Heidenhain iTNC 530 3D operating system software; 6 increased working space to achieve the best, easy to operate; 7 stable casting frame structure and standard temperature compensation on the Z axis, to achieve maximum contour accuracy and Surface quality; 8ATC software for the most simplified adjustment of linear feed drive.